Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

My mini keg is bulging. What is wrong?

bulging keg mini wrong
0
Posted

My mini keg is bulging. What is wrong?

0

Your beer is over carbonated. You can sometimes relieve excess pressure by pushing a dull kitchen knife under the rubber bung until you hear hissing. This is a dangerous situation, and gloves and eye protection should be worn when dealing with a swollen keg. See section above. 5.60 My keg beer seems under carbonated Keg beer, whether commercial or home brewed, always has less carbonation than bottled beer. If your keg beer seems really flat, try adding carbonation (this does not work on a Tap A Draft) by turning the pressure up to 25 PSI for 1 to 2 days while the beer is refrigerated. This will force more C02 into the beer. After a day or two, reduce the dispense pressure to 3 PSI and remove the excess head pressure by pulling on the relief valve on the center of the keg. If your Tap A Draft System beers seems under carbonated, the only thing you can do is place the bottle in a warmer area and hope the yeast reactivates to further carbonate the keg (shake the bottle to facilitate this

Related Questions

What is your question?

*Sadly, we had to bring back ads too. Hopefully more targeted.