On which vehicles does the BlutraxTM OBD Interface Unit work?
The BlutraxTM OBD Interface Unit is designed to work on OBD-II / EOBD compliant vehicles. 2001 and newer petrol cars sold in Europe are EOBD compliant. Some pre-2001 petrol vehicles and post-2001 diesel vehicles have a 16-pin connectors but are not EOBD compliant. OBD Connector If in doubt, locate your OBD connector and inspect which pins are present. The connector must have pins 4, 5, and 16 for power and ground. Then the following sets of pins may be present, depending upon the protocol in use: • Pin 7 should be present for ISO 9141-2 and ISO 14230 (KWP2000) communications. Pin 15 may or may not be present for these protocols. • Pin 2 and pin 10 are present for SAE J1850 protocols. • Pin 6 and pin 14 are present for CAN bus (ISO 15765-4) protocols. Or ask us about your vehicle through our feedback page. • Works with all ISO based petrol cars for sale to Europe since 2001 • Works with all ISO based petrol cars for sale to USA since 1996 • Works with OBD II/EOBD protocols ISO 9141-2 (I
