The IP configuration process did not work, how can I configure the device?
There are a number of possible causes for this. • Network Security Some networks prevent the packets used to configure the DisplayWatch device from passing across the network. To overcome this you will need to use either a crossover CAT5 cable connected directly between your computer and the device, or connect the device and your computer to a hub. This situation usually occurs when there is a secure high end switch between your computer and the device. • Insufficient User Priveleges On Windows NT/2000/XP/Server 2003 only priveleged users can add the static ARP mappings which are required to configure the device. Log on as a Domain Administrator, Local Administrator or Power User to complete the configuration of the device. • Network IP Address Range Ensure that the IP selected for the device is valid for the area of the network it is plugged into. Your IT staff may be able to assist you by confirming the validity of the IP address. • Local IP Address Range If the unit is to communicat
Related Questions
- How do I configure the management IP of a security context in transparent mode without going to the device to configure it?
- How do I configure the management IP of a security context without going to the device to configure it?
- Can we use the web interface for configuration from a different LAN segment than the IP device?
