The manual lists 2 clear “double-star” posts, where are they on my IJ?
The short answer is, “I don’t know”. But I believe that one of these posts is mounted to the backbox light-board to keep the lights from breaking against the backbox when the light panel is swung out too far. The other post is a mystery. I believe that historically, pinball machines had a few of these posts mounted to the underside of the playfield to provide some place to route wires and attach wire-ties. I would bet that the technical writer for Williams did not put a lot of effort into finding out exactly what the deal is with these posts and decided to list ‘2’. I believe that things like this are at the whim of the tech writer and nobody really double checked his or her work. When I shopped out pinball machines at my last job I can not remember a SINGLE pinball manual that correctly listed the rubber ring count. They were always off by 1 or 2 of the smaller sized rings. Also, the “Playfield plastics” kit for most pinball machines rarely contains every plastic they often don’t incl