|
Even with a tread depth of 4 mm, road holding distinctly deteriorates, especially in wet conditions. The tyres can lose contact with the road, thus leading to steering and braking difficulties. Therefore dont wait until the tread depth has reached the legal limit of 1.6 mm before replacing your tyres. Summer tyres should be changed when the tread depth reaches 2 to 2.5 mm and winter tyres at 4 mm. Tread depth can best be measured at the lowest point in the principal grooves. In measuring the degree of wear in the tread depth, any bridge-like protrusions or reinforcements in the tread base can be ignored. You will often find branded into the tyre sidewall, the abbreviation TWI (sometimes other letters are used) or tread wear indicator. If you follow the arrow youll find a small rubber moulding, 1.6 mm above the base of the tread groove. When the tread beside this point has worn down to this level, you can see that the tyre has reached the wear limit and should be replaced. Remember: ...
more
|
Tyre tread depth when should I replace my tyres?
Related Questions
- Puncture Proof lays down a thin protective coating between the inside tread of the tyre and the air within ...
- No. Puncture Proof is designed to flex with the tyre as it moves.
- A The legal minimum is 1.6mm over 75% of the tread width BUT we find that tyre performance (braking distance/ ...
- [Back to top] Tread depth is the distance to the bottom of the tread grooves. It is measured in 1/32-inch ...
- The tread on your car's tires is very important. Tread helps your tires adhere to the road, especially during ...