What are my options if the RCM fails to operate properly?
First check the battery pack is functioning. If the red LED power light does not come on, or is blinking, (indicating low battery power) the battery pack may be near exhaustion. Lithium batteries have an almost flat discharge curve, unlike the more common alkalines, (which lose their power gradually). This means Lithiums maintain near full strength throughout their useful life then cease to work rather suddenly. Battery replacement is a simple task so refer to the website for a clear set of instructions. If erratic control with the Key Fob is the problem, its internal battery (which has a shelf life of about three years) may need changing. Another possible problem with erratic or no control is that each RCM and Key Fob is shipped with one of three standard codes and corresponding color to reduce conflicts when more than one balancing task is being done in the same area of a project. Verify that your RCM and Key Fob have a matching number of “dots” (1-black, 2-yellow, or 3-red) on the o