What are the available thicknesses and types of EPDM single-ply membrane?
EPDM membrane is manufactured in various thicknesses (.045″ to .090″ thick) and is available as a non-reinforced or reinforced sheet (depending upon application). Other thicknesses are also available for use in non-roofing applications as a special order. Reinforced membranes contain an internal fabric that is completely encapsulated within the EPDM membrane sheet and is available in various thicknesses (.045″ to .075″). Occasionally, a fleece layer can be added to the underside of the sheet that serves as a built-in underlayment for direct re-roof applications over certain types of existing roofing material. EPDM is also manufactured as vulcanized (cured) or non-vulcanized (uncured) membrane. Vulcanized membranes have set physical properties due to the vulcanization process and exhibit consistent behavior throughout the sheet that allow the membrane to have memory – this means when the membrane is stretched, it will return to its original state. On the other hand, non-vulcanized EPDM