What are the essential protections & features for a good Inverter?
Overload protection with Auto-resetting: As you apply load (bulb, fan, tubes etc.) more than inverter capacity (during Inverter ON condition), it will warn you with Beep Sound & LED Indication, in this situation the system will shut down Output for a few seconds and then start to check the load on Inverter, and do this process again & again until you don’t reduce the load & when the loads become within the capacity of the Inverter, the Inverter will stop beep sound and off the OVERLOAD indication and will supply the power to your appliances automatically. Low battery /deep discharge protection: The battery must be protected from discharging completely. Lead Acid batteries / SMF / Tubular batteries should not be discharged below a certain threshold level. The battery deep discharge protection is required because a deeply discharge battery is difficult to recharge. Su-Kam’s range of power Inverters have the low Battery / deep discharge. Battery over charge Protections: Overcharging occur
