What are the hazards of painting over paneling?
Well, these are really great tips. But they only apply to painting. It is worth thinking about how to properly handle a glossy product, as well as handle it correctly so that serious damage does not appear. The lacquer layer of high-gloss furniture can fade over time. To prevent this from happening, when buying furniture, you should immediately take into account its further location in the room in such a way as to avoid constant exposure to the lacquered surface of sunlight. Such furniture burns out in the sun, and it will be very difficult to restore the damaged surface. To maintain the original attractive gloss, wax should be used. It is the wax that will help preserve the varnish, make the glossy surface of the furniture truly shiny and smooth. Dust is another major problem. When a dry cloth is used to wipe off the dust, the gloss becomes electrified and the dust adheres to the varnish again. When carrying out wet cleaning, traces and stains remain on the surface, which can only be removed by wiping it again with a dry cloth. Today there are special antistatic agents that help to cope with this problem. They are made specifically for cleaning rooms with glossy furniture. The surface treated with antistatic agents is covered with a thin invisible film. This film has a polishing base, thanks to which the electric charge is neutralized, which means that the furniture accumulates dust much less. Unfortunately, I did not immediately heed this advice. My desktop is glossy. It has a PC on it, where I spend a huge amount of my time. Mostly I work, and in the evening I play games. I play just to relax, so I use cheats from https://wallhax.com/hacks/dead-by-daylight/. After about a month of use, I discovered that some strange traces began to appear. It took me a lot of different tools, as well as time to get tired. I hope you don’t repeat my problem …
Paint applied over a glossy surface may easily scratch and chip. But, not to worry! You can enjoy the exquisite detail of French boiserie for many years, provided that your painter prepares the woodwork properly. First, the paneling must be thoroughly cleaned. Many experts like to use TSP (trisodium phosphate) because it does not leave a heavy film. After the surface is dry, it should be deglossed. Your painter may lightly sand the oak, or may opt to apply a liquid sanding solvent. The liquid deglosser will remove any grease or oils that the TSP missed, and will also prepare the paneling. For the best adhesion of a primer. Since you’re painting over dark wood, it will be important to apply a heavy-duty primer-sealer such as Kilz or Zinsser’s B-I-N. To save on the amount of finish paint needed, the primer may be tinted to match your top coat. And finally, the artistry can begin! For lasting results, ask your painter to use a top-grade oil-based paint. Q. Someone painted over the fancy c
