What are the installation, operation, and maintenance requirements for my weight measurement device?
(a) If you use a solvent recovery system, you must install, operate, and maintain a weight measurement device to measure the weight of HAP solvent loaded into the solvent mixer and the weight of HAP solvent recovered for each mix batch. (b) For each weight measurement device required by this section, you must develop and submit for approval a site-specific monitoring plan that addresses the requirements of paragraphs (b)(1) through (6) of this section: (1) Procedures for installing the weight measurement device; (2) The minimum accuracy of the weight measurement device in pounds and as a percent of the average weight of solvent to be loaded into the solvent mixer; (3) Site-specific procedures for how the measurements will be made; (4) How the measurement data will be recorded, reduced, and stored; (5) Procedures and acceptance criteria for calibration of the weight measurement device; and (6) How the measurement device will be maintained, including a routine maintenance schedule and sp
Related Questions
- Did you receive my reinstatement requirements; i.e., fee, SR-22 filing, or Ignition Interlock Device (IID) installation/maintenance notification?
- How long do smoke alarms last and what are the installation, maintenance, testing and replacement requirements?
- What are the installation, operation, and maintenance requirements for my continuous monitoring systems?