What are the pinouts for ormal SCSI connectors?
ANSWER From: snively@scsi.Eng.Sun.COM (Bob Snively) Originally dated May 23, 1990 The connector families described by the drawings have standard pin numberings which are described the same way by all vendors that I have encountered. The SCSI-2 specification identifies the standard numbering, using that convention. It happened to be documented by AMP, but all the vendors use the same convention. The following diagrams have the outline drawings of connector sockets at the bottom. This is really for reference only, because the connector sockets and plugs are both specified as to their numbering and usually are labeled. There are some minor problems in naming the microconnector conductor pairs, which I have corrected in the enclosed diagram. All the conductor pairs of the Mini-Micro (High Density) connector are in fact passed through on the cables. SCSI-2 defines the RSR (Reserved) lines as maybe ground or maybe open, but they are still passed through the cable. Most present standard SCSI
