What are the recommended values for the offset TC DAC and FSOTC DAC, if they are not used for first-order temperature compensation?
A. The offset TC DAC and FSOTC DAC can be set to any arbitrary values. However, it is recommended that they be set to non-zero values, e.g., 0x0200. • Q. Can the coefficients in the OFF lookup table have different signs? A. No. The sign of all entries in the OFF lookup table is specified by a single bit in the Configuration register. Therefore, before starting the compensation process, necessary precautions must be taken to ensure that the offset compensation coefficients will all have the same polarity, positive or negative. • Q. Must I use the Serial.dll provided with the EV kit software to operate in digital mode? A. Not necessarily, but it is highly recommended. Every function in the Serial.dll has been optimized and verified for correctness, and there are built-in traps and tests for special circumstances to ensure reliable communication. • Q. Must I use the KEY (interface adapter) provided by Maxim to communicate with the signal conditioner? A. Not necessarily, but it is highly r
Related Questions
- What are the recommended values for the offset TC DAC and FSOTC DAC, if they are not used for first-order temperature compensation?
- Is there any advantage in using the offset TC DAC and FSOTC DAC in addition to the lookup tables?
- What temperature is recommended for the water used to dilute the embalming solution?