What are the steps in a typical Aurora asbestos removal project?
1.) Assess the site. First, all materials with asbestos must be identified. For larger projects this is often performed by a third party inspection firm. 2.)Contain the area. During the asbestos removal process the asbestos fibers can become disturbed and aerosolized. This can lead to cross contamination and create a situation much worse than the original problem. Therefore, asbestos abatement contractors in Aurora, Colorado use specialized techniques to contain the area. Often this involves the use of HEPA filtration, negative air machines and plastic sheeting. 3.) Remove or encapsulate. Asbestos containing materials are removed or encapsulated. 5.) Rebuild After the area is free from asbestos, the rebuild process can begin.
• Assess the site. First, all materials with asbestos must be identified. Many states require an inspection by a licensed asbestos inspector. • Contain the area. During the asbestos removal process the asbestos fibers can become disturbed and aerosolized. This can lead to cross contamination and create a situation much worse than the original problem. Therefore, asbestos abatement contractors in Aurora use specialized techniques to contain the area. Often this involves the use of HEPA filtration, negative air machines and plastic sheeting. • Remove or encapsulate. Depending on the type of material, asbestos containing items are removed or encapsulated. In cases where the asbestos is located in a low-use area, such as a boiler room, encapsulation is often preferred. However, contact the Aurora health department to determine if this is acceptable. • Rebuild After the area is free from asbestos, the rebuild process can begin. No specialized equipment is necessary.
