What causes the on-screen message No satellite signal being received?

0
Posted

What causes the on-screen message No satellite signal being received?

0

• Bad weather. By its very nature, this is a temporary phenomenon; once the weather conditions improve, the signal should return to normal. • The dish is loose or has shifted position, or the LNB is not correctly aligned. Check the alignment of both dish and LNB and check the dish for secure mounting. • The LNB cable may be damaged. Check for damage to the LNB cable and for water-ingress. If necessary, replace the cable. • The F connector on the rear panel of the digibox is loose. Fasten the F connector securely to its socket. • Incorrect settings at the LNB Setup and/or Default Transponder screens. Check the settings of these screens, which can be accessed from the ‘hidden’ Installer Setup menu. • Faulty LNB. • Faulty receiver – read the repair page.

Related Questions