Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

What causes the on-screen message No satellite signal being received?

0
Posted

What causes the on-screen message No satellite signal being received?

0

• Bad weather. By its very nature, this is a temporary phenomenon; once the weather conditions improve, the signal should return to normal. • The dish is loose or has shifted position, or the LNB is not correctly aligned. Check the alignment of both dish and LNB and check the dish for secure mounting. • The LNB cable may be damaged. Check for damage to the LNB cable and for water-ingress. If necessary, replace the cable. • The F connector on the rear panel of the digibox is loose. Fasten the F connector securely to its socket. • Incorrect settings at the LNB Setup and/or Default Transponder screens. Check the settings of these screens, which can be accessed from the ‘hidden’ Installer Setup menu. • Faulty LNB. • Faulty receiver – read the repair page.

Related Questions

Thanksgiving questions

*Sadly, we had to bring back ads too. Hopefully more targeted.