A:
1 Answer
rank
1
|
Prepare the wallboard surface as you would for painting: tape joints with drywall tape and joint compound and spot fasteners with joint compound. Then prime the surface with Sto Primer after the joint compound is dry. Apply Sto finish after the Sto Primer is dry following normal application procedures. Note that the Sto Primer must be tinted to match the finish color if using Sto Decocoat. It should also be tinted for fine aggregate finishes such as Sto Fine Sand and Stolit .75 for best results.
more
|
stocorp.com
Related Videos
Add your answer...
Top Answerers
1.
2.
3.
Top Askers
1.
2.
3.
Top Supporters
1.
2.
3.
What do I need to do to put Sto finishes over interior gypsum wallboard (drywall)?
Related Questions
- There are several different schools of thought when it comes to defining the term wallboard. Broadly speaking, ...
- Video Transcript What Is Drywall? Hi! This is John on behalf of Expert Village. In this video clip, I will be ...
- ASTM C 36 designates two types of gypsum wallboard, regular and type X. Type X wallboard, which is typically ...
- Having the drywall simply contact the top and bottom plate could result in a 1-2 STC reduction. If drywall is ...
- Yes, just make sure that drywall screws used on the resilient member side of the wall only penetrate into the ...