What exactly is a DOHC engine….???
Car engines are built around a set of “cooking pots” called cylinders (usually anything from two to twelve of them, but typically four, six, or eight) inside which the fuel burns. The cylinders are made of super-strong metal and sealed shut, but at one end they open and close like bicycle pumps: they have tight-fitting pistons (plungers) that can slide up and down inside them. At the top of each cylinder, there are two valves (essentially “gates” letting things in or out that can be opened and closed very quickly). The inlet valve allows fuel and air to enter the cylinder; the outlet valve lets the exhaust gases escape. The control for these valves is the camshaft (your DOHC, in your case) which is connected to the crankshaft…read below more about it. At the top of the cylinder, there is also a sparking plug (or spark plug), an electrically controlled device that makes a spark to set fire to the fuel. At the bottom of the cylinder, the piston is attached to a constantly turning axle
