|
Typical terminals and functions for most single stage models (refer to specific installation instructions for your type or model number when wiring or installing): RH. . . . . . . . . . . .Power for heating. RC. . . . . . . . . . . .Power for cooling Y. . . . . . . . . . . . .Compressor W. . . . . . . . . . . . .Furnace G . . . . . . . . . . . . .Indoor Blower O . . . . . . . . . . . . .Powered constantly in cool B . . . . . . . . . . . . .Powered constantly in heat MV . . . . . . . . . . .Power for heating, millivolt system 6 . . . . . . . . . . . . .#6 terminal for SPDT zone valve.
|
What functions do the connecting terminals have on the subbase?
Related Questions
- Thickness Design of Asphalt Pavements for Heavy Wheel Loads. Or you can purchase our SW-1 Asphalt Thickness ...
- Properly constructed, a subbase can last 30 years or more -- long enough to host three or four synthetic turf ...
- If the green LED's on the center module are not lit, it probably means that the clamps are not securely ...
- This arrangement is supported by AS3000 so long as certain circuit conditions are complied with. AS3000:2000 ...
- There are three terminals. Terminal 1 is used by charter flights from North America, including the local ...