What is deburring, and why is it important for bending tools?
Deburring is the first step in tube preparation after the tube is cut. Deburring a tube includes squaring the end of the tube concentric to the inner and outer edges of the tube. The chamfer should not exceed half the wall thickness of the tubing while deburring. Deburring is an essential step in any tube fabrication. The two common burrs for tube, are hot formed burr, and cold formed burr. The hot formed bur is the most difficult to deburr. This burr is associated with abrasive saws. There is usually more material mass to this type of burr, which will deplete any deburring method. The worst part of the hot-formed burr is the heat. Usually, heated then cooled material is harder to deburr. The cold formed burr is probably the most economical for tube manufacture. Deburring this type of burr is much easier. Tools For Bending offers many tools for deburring round tubing and pipe. Deburring and Squaring blades for any tube deburring equipment in the industry to our own TFV-50 End finisher
