What is required for the SSCNET interface system?
Just an FSC-200 SSCNET adapter board that easily inserts into a PCI slot in a PC. No additional proprietary hardware components are required.TOP Q: What are my options for additional I/O for an SSCNET interface system? A: You can add optional and affordable I/O by adding a VersioBus II adapter board (ISA, PCI or PC104) to your system. Alone, this adapter board provides 32 points of local I/O and a handwheel connector. If more than 32 points of I/O is required, an I/O network can be connected to the VersioBus II adapter board using IM-305 I/O modules. Each IM-305 provides 64 points of I/O, and up to four IM-305s can be daisy-chained together with VersioBus II fiber-optic cables, for a total of 256 points of I/O in addition to the 32 points of local I/O. NOTE: We recommend against using an SSCNET PCI board with a VersioBus II PCI board this combination is possible, but not recommended, due to possible issues with a PC’s configuration. Therefore, we recommend using the FP-85 (VersioBus II