What is the load on the filter drier when using QwikShot Acid Flush?
The QwikShot Acid Flush is absorbed into the drier along with the acid or moisture, leaving no residue of any kind that could invalidate a warrantee. The QwikShot will also accelerate the movement of moisture into the filter-drier. The QwikShot Acid Flush dose uses only a fraction of the capacity of the filter-drier. If you are concerned, when you replace the filter-drier use a larger one (Approximately 25% larger if molecular sieve drier, 50% larger if an activated alumna drier). Some people have been concerned about the need to change the filter-drier when acid is detected.