What is the minimum configuration I need to get an NSRP cluster working in VSD-less env?
To configure a pair of devices in a VSD-less NSRP cluster, the minimum requirements are the following: • Bind the interfaces where the NSRP heartbeats traverses, into the HA functional zone. • Define the Cluster ID for the devices in the NSRP pair. • Configure the VSD-less cluster. • Enable non-VSI session mirroring between the two devices in the NSRP cluster. For example: • Bind the interface where the NSRP heartbeat traverses in the HA functional zones: fw-> set interface ethernet1/7 zone ha fw-> set interface ethernet1/8 zone ha • Define the cluster id for the devices in the NSRP pair: fw-> set nsrp cluster id 1 fw(B)-> Unit becomes master of NSRP vsd-group 0 fw(M)-> • Configure the VSD-less cluster: fw(M)-> unset nsrp vsd-group id 0 fw(B)-> At this point, both devices in the cluster will be seen as backup (B). • Enable non-vsi session mirroring between the two devices in the NSRP cluster: fw(B)-> set nsrp rto-mirror session non-vsi fw(M)-> • Define the local interfaces for each dev