Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

What special steps must be taken to ensure proper installation of Air Cooling Coil Coating?

0
Posted

What special steps must be taken to ensure proper installation of Air Cooling Coil Coating?

0

The first thing you must do is ensure that the evaporator is dry. Air Cooling Coil Coating will not properly adhere to wet surfaces. The evaporator is easily dried by running the climate control system with heat on High, fan on High, and mode set to Recirculate, first making sure that the compressor is not engaged. Running hot air through the plenum chamber for 20 minutes will remove any moisture, ensuring that surfaces are dry. After the product has been sprayed into the A/C system, it needs to sit for 15 minutes. After this 15-minute drying time, the climate control system is re-engaged (again with heat on High, fan on High and mode set to Recirculate) and run for 20 minutes to cure the product onto coated surfaces. Once this has been done, the installation is complete! The only other necessary precaution is to remove any microfilters from the system prior to installing Air Cooling Coil Coating. These filters will clog if Air Cooling Coil Coating is applied to them, in addition to bl

Thanksgiving questions

*Sadly, we had to bring back ads too. Hopefully more targeted.