What Tyan motherboards has XtremeData tested the XDM2000F with?
S2912 – Phoenix BIOS (supported by open source BIOS) and linux BIOS (supported by XtremeData) Q: My system powers up and I can program an image to the FPGA on the module, but I cannot get my application working on the module. For example, I’m having problems running the diagnostic tests for the reference design even though the reference design app A: (1) Check that the module is being recognized on the PCI bus by typing ‘lspci’ from the command prompt. You should see the line item for the module appear in the resulting output: 40:01.0 Non-VGA unclassified device: Altera Corporation Unknown device 5844 (rev 01) If you do not see this line item, then attempt to re-seat the module (Remember your static protection!) and go to step (2). If you see this line item, then go to step (3). (2) If re-seating the module does not fix the problem, then we need to determine if there is a hardware problem with the module. The best way of checking this is to revert to a known good image and re-run the ‘
