Who is Alan Cox?
Have you been _reading_ linux-kernel, or > linux-net? Look at the code attributions in your kernel > source! Alan will most likely answer your message anyway if it > went out on a linux group. Well, until putting this new box together, I haven’t read much in the lists in over a year. My old linux box has been working without a problem for over a year. >…. > I don’t need to use anything in the later than 0.46 drivers, > and the driver options are as documented on the web page for > them – not that they mean very much, as I found out. After a few hours of sleep last night I did finally get the NIC to be recgonized at init. I compiled the driver directly into the kernel instead of as a module, and added append=”ether=10,0xde00,eth0″ to my lilo.conf. That gets it to show up in /proc/ioports and /proc/interrupts, but it still don’t work. I did find out that it is the 3c905B Cyclone 100BaseTx instead of just being the 3c905 Boomerang 100BaseTx like the book says. The date of manufacture is