Why control joints are needed and how to install them correctly?
Contraction/control joints are placed in concrete slabs to control random cracking. A fresh concrete mixture is a plastic (fluid) mass that can be molded into virtually any shape, but as the material hardens there is a reduction in volume (shrinkage). When shrinkage is restrained by contact with supporting soils, granular fill, adjoining structures, or reinforcement within the concrete, tensile stresses develop within the concrete section. While concrete is very strong in compression the tensile strength is only 8% to 12% of the compressive strength. In effect, tensile stresses act against the weakest property of the concrete material. The result is cracking of the concrete. There are two basic strategies to control cracking for good overall structural behavior. One method is to provide steel reinforcement in the slab which holds random cracks tightly. When cracks are held tightly or remain small, the aggregate particles on the faces of a crack interlock thus providing load transfer ac
