Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
Temp Sensors can be placed in these suggested areas, and secured using the yellow heat resistant stickers provided with the case.
... more
2 Likes
·
1 Answer
A:
You may use the 44-40 pin adaptor cable, 1JIDECB or if using the standard size IDE drive in conjunction with a chipdisk, you will need a chipdisk adapter (1JUMADA) and the 44pin IDE cable (1IDECAB).
... more
2 Likes
·
1 Answer
A:
Shelter dome packages come with heavy duty anchors that connect the dome frame to the dome deck or floor.
... more
2 Likes
·
1 Answer
A:
Based on a 1-1/2" recommended spacing between fasteners, and a 25" base diameter, it would take 50 total. The number of fasteners can be estimated by multiplying the Dektite base diameter by 2.
... more
1 Like
·
1 Answer
A:
No = this is not yet available. If you are called for interview, you may be asked to bring any relevant supporting documents with you.
... more
2 Likes
·
1 Answer
A:
A. Permits are required for all signs, and each proposal will be reviewed specific to your location.
... more
2 Likes
·
1 Answer
A:
The SmartBelt is ergonomically designed for ease of use. The sleep technologist attaches it to the patient in the same way as you would attach a piezo belt. The SmartBelt is sold with four different size velstretch bands: 2-feet (60 cm), 3-feet (90
... more
0 Likes
·
1 Answer
A:
The service will work with any analog phone using ATA devices (no LCD support possible), most SIP compliant IP phones such as Cisco IP phones, Polycom IP phones, Aestra 480i IP phone, Sipura 841 IP phone, LG LIP6812, LG LIP6830 IP phones as well as
... more
1 Like
·
1 Answer
A:
Yes. On the Event Set-up portion of the form, there is an "Attach Diagram" section that allows you to upload a file that will help our Custodial Services Division in planning for the Setup. The file can be an image, a Word document, an Adobe PDF
... more
2 Likes
·
1 Answer
A:
All INFINITY camera models have a standard female C-mount thread. Most microscope brands have adapter/couplers available with a male C-mount thread, or they can be obtained from the microscope provder. It is also possible to obtain custom adapters
... more
1 Next