Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
Once cured there is no odour or danger posed by the injection chemicals. While there is an odour during the process it poses no real health risk.
... more
2 Likes
·
1 Answer
A:
The most popular resin for constructing homebuilt aircraft is epoxy resin. There are several good reasons for this, including strength, durability, resistance to shrinking, ease of application and ease of repair. Although most of the strength of a
... more
2 Likes
·
1 Answer
A:
First, they are stiffer, lighter, more durable & better made than nearly every deck manufacturer. They use all Maple cores and each board is pressed in it's own mold (not with 4 to 5 decks stacked on top of each other), and they are CNC shaped to
... more
2 Likes
·
1 Answer
A:
If you’ve read any of my other posts regarding grout you have more than likely seen me state that epoxy is different. This subject is no exception. Epoxy grout will actually add to the stability of your tile installation – to an extent. Epoxy will
... more
1 Like
·
1 Answer
A:
All exist hydrocarbon paints or coatings including 2k acrylic polyurethane and epoxy have very limited lifetime. They will crack and peel off under sun, water, chemicals, or microbe. Fluorunated polyurethane is a high performance coating. The
... more
2 Likes
·
1 Answer
A:
There are many factors that go into the cost of a floor system - from existing conditions of the concrete, substrate thickness, or the coating system. Special details are also available, such as line striping, decals or logos, cove base and wainscot.
... more
2 Likes
·
1 Answer
A:
A. JFC Epoxy Putty is formulated specifically for copper, brass, and bronze. However, it will bond to other metals as well as to concrete and wood.
... more
Does Selco offer longer leads and connector options on their epoxy encapsulated, leaded thermistors?
2 Likes
·
1 Answer
A:
Yes. The CS Series can be customized to include customer specified lead lengths and insulated lead wires. We can also assemble a connector as specified by the customer. View Selco's CS Series.
... more
1 Like
·
1 Answer
A:
We recommend a double captive type slide for best performence. You may also use a single captive slide, but need to make sure that side clearances between tray and pilaster are to slide manufacturers specs in order to avoid the non-captive side
... more
2 Likes
·
1 Answer
A:
While PAVE does not do any chemical resistance testing, PAVE hermetic epoxy seal feedthru connectors have been used by our customers for many years successfully sealing in a wide range of fuels, Freon, oils, gases including NG, propane, SF6 and
... more
1 Next