This is absolutely not true and is based on a lack of knowledge of legislation that protects the consumer from frivolous warranty voidances by manufacturers.
... more
It is not a proper comparison. Associative Remote Viewing is a protocol for utilizing remote viewing to predict a future event. The actual methodology utilized to do the remote viewing itself does not really matter. I personally do not use, nor do
... more
The Bernoulli effect keeps stale air from leaving the stream close to the unit and contaminating the fresh air entering. When a jet of air leaves a port, close to the port, the Bernoulli effect causes air around the jet to enter the jet. It is only
... more
In some cases, energy recovery does not allow enough moisture to escape the home in winter. We have Heat Transfer Sections, which are not desiccant coated. Use those in winter, the Energy Transfer Sections the rest of the year. Contact us to obtain
... more
The PuriFresh ERV is a Window Mounted Energy Recovery Ventilator. The PuriFresh Window Mounted ERV mounts in a double hung window much like a window mounted air-conditioner, however, it is much lighter and smaller that the typical window mounted air-
... more
Air-change ventilation systems exist that take stale air out and bring in fresh air so as to not rely on cold air drafts for the entry of fresh air to the house. They are simply a box with two fans. In a few of the warm spots of Canada these are
... more
It constantly supplies fresh air to provide a healthy indoor environment by reducing odors and/or indoor pollutants, such as radon, formaldehyde, tobacco smoke, nitrogen dioxides, carbon monoxide and pesticides.
... more
No. An ERV can be utilized with any forced air system equipped with a blower and duct system. It can also be used with non-forced air systems as an independent system.
... more
Heat recovery ventilators will transfer temperature only from the high temperature air to the low temperature air. Energy recovery ventilators transfer both temperature and moisture. Since transferring both temperature and moisture has benefits in
... more
We recommend about every six months. The simple procedures are fully described on the instructions provided with each unit. These maintenance procedures can be completed by you or your contractor. Here are the general maintenance activities: - Clean
... more