Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
The only thing that holds the injector to the fuel rail is an o-ring. Injectors "pop out" of the rail, sometimes dirt gets into the rail and the o-ring won't slide out so easy. Be sure to put a small amount of grease or oil on the new o-ring when
... more
2 Likes
·
1 Answer
A:
I have a 2.8 Mitsubushi Pajero and can recommend PROTEC diesel system cleaner - cleans, lubricates, conditions. I pay £10 a can from www.pocuk.co.uk shop. PROTEC Diesel System Cleaner will remove gums and varnishes from throughout the fuel system
... more
2 Likes
·
1 Answer
A:
Despite design issues inherent from the manufacturer, the #1 cause of Ford 6.0L fuel injector failure is poor maintenance! These first two culprits can be avoided by good maintenance, the last can be avoided if you just stop for gas. 1 Engine oil
... more
2 Likes
·
1 Answer
A:
For many years physicians have prescribed the atropine auto-injector to patients with known nerve agent poisoning. To be authorized to possess and use the atropine auto-injector an individual or organization (as noted above) must have a written
... more
2 Likes
·
1 Answer
A:
No, the end of the needle does not protrude beyond the Connector Luer Lock.
... more
2 Likes
·
1 Answer
A:
The PhaSeal products are packed in sterile packages. There is no need to swab the membranes before the first use, providing aseptic technique is used. The membranes can be wiped with alcohol, e.g. isopropanol (IPA) pads or swab sticks before
... more
2 Likes
·
1 Answer
A:
On One Hand: A Leaky Fuel Injector Is DangerousFuel injectors control the amount of air and fuel that is sent into the engine. If your fuel injector is leaking, it is likely leaking gasoline. This can pose a fire hazard should it begin to drip into
... more
2 Likes
·
1 Answer
A:
A component that allows gas to pass through an orifice before it enters into the burner. It is critical that the orifice is drilled to the right size for LPG or Natural gas. Roastmax pre-drill the orifice to the correct size depending on what gas
... more
2 Likes
·
1 Answer
A:
Gardening is a delight for both those who enjoy working in the soil as well as those who just like admiring gardens from a distance. However, for the gardener a lot more work is involved than for the admirer and a more satisfaction in the end.
... more
2 Likes
·
1 Answer
A:
The injector kits include a mailing label that includes your return authorization for the injector cores. You can use the same packing materials to return the cores. Once the core is received, Rypos will issue a credit to you.
... more
1 Next