Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
Some polished or soft marble/stone can be scratched by an epoxy grout. Always conduct a test area to verify suitability, acceptability and results, prior to proceeding with the actual grout job. "Picture-framing" (a darkening or discoloration of
... more
2 Likes
·
1 Answer
A:
Your shower should be available for use in 48 - 72 hours when cured at 70°F (21°C). However, LATICRETE SpectraLOCK PRO Premium Grout and LATICRETE SpectraLOCK PRO Grout do not reach full stain resistance for 7 days at 70°F (21°C) so please use
... more
1 Like
·
1 Answer
A:
For installations where superior chemical, stain and heat resistance is mandated, use LATICRETE SpectraLOCK 2000 IG. Ideal projects for LATICRETE SpectraLOCK 2000 IG in lieu of LATICRETE SpectraLOCK PRO Premium Grout or LATICRETE SpectraLOCK PRO
... more
2 Likes
·
1 Answer
A:
LATICRETE and LATAPOXY epoxy grouts can be installed into joints from 1/16" (1.5mm) to 1/2" (12mm) wide. However, since these grouts do contain sand, narrow joints will appear with a coarse texture when compared to unsanded grouts.
... more
2 Likes
·
1 Answer
A:
Some polished or soft marble/stone can be scratched by an epoxy grout. Always conduct a test area to verify suitability, acceptability and results, prior to proceeding with the actual grout job. "Picture-framing" (a darkening or discoloration of
... more
1 Like
·
1 Answer
A:
For installations where superior chemical, stain and heat resistance is mandated, use LATICRETE SpectraLOCK 2000 IG. Ideal projects for LATICRETE SpectraLOCK 2000 IG in lieu of LATICRETE SpectraLOCK PRO Grout include, but may not be limited to;
... more
0 Likes
·
1 Answer
A:
Use LATICRETE 86 LatiLevel™ (and LATICRETE Admix and Primer) to level existing, clean concrete or exterior glue plywood floors (with properly fastened diamond wire lath) to depths up to 1 1/2” (38 mm) in thickness. Use LATICRETE 84 LatiLevel™ (and
... more
2 Likes
·
1 Answer
A:
This will vary depending on the tile size, thickness of the tile and joint width. Please visit our website http://www.laticrete.com/coverage to download or use the LATICRETE Grout Coverage Calculator. You can also download the LATICRETE App for
... more
2 Likes
·
1 Answer
A:
There is currently no industry standard for the glues and meshes used on the back of mosaic tile. In many cases, these glues and/or mesh mountings are sensitive to moisture and alkalinity exposure. Unless the glass manufacturer states, in writing,
... more
2 Likes
·
1 Answer
A:
The answer to this question would depend upon the specific thin-set mortar being used. It is always best to use the liquid to powder ratio (as stated on the product packaging and data sheet) as a guideline, and then mix to a certain consistency.
... more
1 Next