How difficult it is to remove a cigarette burn from linoleum depends entirely on how deep the burn is. A shallow, light burn mark may be removed simply by sanding, but the only way to remove a deep cigarette burn from linoleum is to cut out the ... more

You can lay linoleum flooring by first installing a layer of smooth plywood. Cover the plywood with linoleum glue, then carefully lay the linoleum over the glue, and roll with a heavy roller. ... more

No, T2QuickNet may only be employed in a completely flat, enclosed material. T2Reflecta is the correct system for this application, as it is a self-regulating system. ... more

Ceramic tile can be laid over linoleum that is sitting over concrete. The linoleum must be both smooth and rigid for the ceramic tiles to be installed properly. ... more

It We do not recommend this. Residue built up on the surface of the vinyl or linoleum could interfere with proper bonding of the adhesive, causing it to delaminate over time. ... more

To remove a linoleum floor simply pull up what you can with your hands. Buy a quality wide blade pole scraper and a bucket of adhesive remover and scrape the rest from the sub-floor. Any remaining can be feathered with a sander, clean well and lay ... more

Sometimes the linoleum gets a little tired looking in your kitchen or bathroom. If you don't really want to rip it out, but you're looking for a change, you are in luck. In just a few easy steps, you can paint your linoleum and bring that drab ... more

No. The floor surface must be porous. It works best on hard mineral surfaces such as ceramic, porcelain, clay and quarry tile, brick, concrete and cement flooring. To assure complete compatibility, always apply AS-303 to a test area first. ... more

These two materials are often confused and used interchangeably. Basically, Vinyl is made up of fibers which are synthetic. The main body of this material is cardboard and the thickness is dependent on how many layers of vinyl is used. On the other ... more