Filter by tags
Questions, Articles and Polls
1 Like
·
1 Answer
A:
PCA & SG: standard recommendation is to add PCA (or SG) at 0.5%, as we found that to be the most cost-effective. You may prefer to go up to 0.75%, which is the optimal loading in most thermoplastics (thermosets need a slightly higher loading). Many
... more
1 Like
·
1 Answer
A:
All top surfaces of the major TrackPan components feature a slip-resistant design.Grates and Covers have a raised, molded-in texture that is very similar to a diamond plate design.The inner surface of all Center and Side TrackPans has a surface
... more
2 Likes
·
1 Answer
A:
The card is valid for a maximum period of three years after initial loading.
... more
1 Like
·
1 Answer
A:
Country of Origin is China, Port of Loading is either Beijing or Guangzhou and the price are FOB China.
... more
2 Likes
·
1 Answer
A:
If your images need color or lighting corrections, or a watermark, then you should process them with your image editing program first. If your images look just fine straight off the camera, then you can drop the JPGs directly into Clic*Pic.
... more
2 Likes
·
1 Answer
A:
Within the radius of influence of a Spargepoint, the ozone demand should match the gram requirement for the contaminants present. References published by the ACS and the AEHS may be used for common contaminants.
... more
2 Likes
·
1 Answer
A:
A. Unless specifically indicated in the data sheet please follow the detailed Western Blotting protocol that we recommend to our customers. You will find the protocol at the following link: http://www.biovision.com/. Conventionally, we use
... more
2 Likes
·
1 Answer
A:
Intel® AMT only supports text (ASCII) graphics. I cannot locate an Intel® AMT machine using IP scan, even though I can connect to the machine using Web GUI. Possible cause: The IP address cannot be resolved into the host name. Check the DNS forward/
... more
2 Likes
·
1 Answer
A:
A. Following independent testing of the Heliscreen at the national CSO testing facility at Wigan and Knostrop Wastewater Treatment Works, the maximum recommended loading rate for the Heliscreen is 515 gal/min/ft2.
... more
1 Like
·
1 Answer
A:
This is generally related to the Flash application being blocked and is seen most often by people running Firefox. If you are using Firefox check your add-ons/extensions for Adblock and Flashblock. The original Adblock extension does not handle
... more
1 Next