Filter by tags
Questions and Articles
339 items
Where about is the cat in lumber yard on runescape?
A:
The cat is upstairs and the kitten is downstairs in a crate that has "search" as an option. The site below has all sorts of tips for RS.
... more
Can I substitute an accessory, slide or type of lumber used?
A:
Moynihan Lumber | Beverly, MA | North Reading, MA | Plaistow, NH Monday - Friday 7am - 5pm, Saturdays 8am - 1pm (Saturdays 7am - 5pm in Beverly)
... more
Where to buy lumber in Houston?
A:
I'd like recommendations from anyone in Houston on where to buy the stuff that you cannot obtain from Lowe's/Home Depot. I live on the west side of town near Wilcrest and Westheimer. I'm looking for a place to regularly buy: Baltic Birch plywood Hard
... more
Just yanked some bars out of driftwood that was sitting along the beach... Lumber mill tiedowns that got away??
A:
Anyone know what they use for these things, ie type... Ive got about 7 feet of teh stuff... what do I do with it now!
... more
How many board feet of lumber does it take to build a house?
A:
Different-sized houses will require different amounts of lumber. A board foot is calculated as 12-inches square by 1-inch thickness. To build a 1,800 square-foot house, you'd need 10,000 board feet.Source:<a href="http://sftrc.cas.psu.edu/FromWoods/P
... more
What do I do if I don’t receive my e-mail of the Random Lengths, Yardstick, International, Lumber, Panel, or Midweek PDF file?
A:
-- Please check with your Internet support person. -- Check with your Internet provider and see if their e-mail host is down. -- Check to see if you have a firewall -- Check to see if Random Lengths is on your whitelist and in your address book -- Co
... more
What are the lumber dimensions for framing?
A:
Typical deck: Post: 6x6 / Ledger: 2x8 / Joist: 2x8 12”o.c. Most decking boards have a maximum span of 16” o.c. With a diagonal layout your joist is 12” o.c. If you layout is parallel with the house your joist can be set at 16” o.c. For heavier loads
... more
SANSIN PTL; can it be used on non pressure treated lumber?
A:
Yes! PTL performs outstandingly on many wood species. Keep in mind that the color is somewhat stronger than with other Sansin wood coatings. • Can I mix Classic and SDF in the same can? Answer: No, the base formulas are inherently different. Although
... more
I have some old carpet and lumber pieces Id like to get rid of. Will Waste Management pick it up?
A:
Yes, as long as the carpet is cut into pieces smaller than 4 feet. The lumber must be bundled in small lightweight bunches.
... more
SHOULD PRESSURE-TREATED LUMBER AND PLYWOOD BE DRIED PRIOR TO INSTALLATION?
A:
Yes. As with all construction wood, both treated wood and plywood should be dried to a moisture content of 19% or less prior to installation in a building to ensure dimensional stability. Drying is less important when CCA-treated wood is to be used o
... more