Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
Yes, Warehouse Builder does support parallel inserts, updates, deletes. All objects can be configured for the correct degree of parallelism and Warehouse Builder allows users to apply hints for further performance tuning.
... more
1 Like
·
1 Answer
A:
Unfortunately, things aren't as simple with the parallel port. If all you need is simple line-printer-type output (check the status lines and send each byte with a strobe), you may be able to use the Generic printer object, or the Createfile and
... more
2 Likes
·
1 Answer
A:
Yes, the Employment Services group at Parallel recruits and places skilled IT and Engineering Professionals into some of the top companies in Minnesota and across the US.
... more
2 Likes
·
1 Answer
A:
No, but a specific device driver may make use of it if available. For example, if your PC and printer both support ECP mode, but your printer's port has no DMA channel assigned, the Windows 95 printer driver will use Fast Centronics mode instead of
... more
2 Likes
·
1 Answer
A:
This is an Interface System (see above) variation used with any existing Code 3 switching system, including most non-Code 3 control heads and switch packs, in combination with the Code 3 2100SC lightbar.
... more
2 Likes
·
1 Answer
A:
Yes. Both ISDN packages load the module isdn.o, otherwise the naming conventions are different. Tip: rename Urlichs isdn.o to uisdn.o, and change lib/modules/modules.isdn (or whatever the file is called that lists the modules and is read by the
... more
1 Like
·
1 Answer
A:
A. This is debatable. Generally, higher voltage is more efficient and running higher voltage motors in parallel would be better, as is the case with the E-Maxx. If you are running a vehicle where one motor powers the left side and the other powers
... more
2 Likes
·
1 Answer
A:
Set your computer parallel/printer port to EPP mode only. EPP mode only and not ECP+EPP or SPP.
... more
2 Likes
·
1 Answer
A:
These stripes, often called Zebra Stripes due to the alternating colors of the original magnetometer readings when the first observations were made. It is directly related to two processes...geomagnetic reversals and seafloor spreading. ChaCha!
... more
2 Likes
·
1 Answer
A:
We suggest three, although it can be done with two. We recommend that you use one parallel port to connect to user controls options: feed hold, feed rate override, joystick and cycle start. The remaining two parallel ports will support up to four
... more
1 Next