Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
Peek polish safely restores tarnished and damaged metals: chrome, aluminium, magnesium, and alloy wheels.
... more
2 Likes
·
1 Answer
A:
Crystallizing is the reaction produced by the crystallizer liquids when getting in contact with calcium carbonate from stone, achieving in this way a natural shine as well as the parcial waterproofing of the floor. Polishing is the application of a
... more
2 Likes
·
1 Answer
A:
I can't think of another novelist as skinless as Henry Roth. The author of Call It Sleep (1934), a triumphantly bruised account of a greenhorn's childhood on the Lower East Side, was a shy man, Galician-born, who never developed the hide that would
... more
2 Likes
·
1 Answer
A:
When you select this process, we'll interview you about your thoughts and ideas on the design so we can gain an understanding of what you think could be better or what you think might be missing. After this casual interview, we'll work on the re-
... more
2 Likes
·
1 Answer
A:
This is a simple procedure, which is carried out using an ultrasonic scaler. Its tip vibrates to remove tartar and other deposits from your tooth surface. This does not damage the tooth enamel. Polishing your teeth follows this procedure. Scaling
... more
2 Likes
·
1 Answer
A:
A. The normal life expectancy of the finished floor surface is more than 10 years. It may last indefinitely, even longer than the building itself. With proper maintenance, your floors should retain their initial gloss far many years. Never use
... more
2 Likes
·
1 Answer
A:
A. Yes. The DIPOC system leaves the floor with a "wet" appearance, and the floor will not be slippery. Floors which are kept clean and dry will be virtually the same as unpolished, bare concrete surfaces, regarding "slipperyness". According to the "
... more
2 Likes
·
1 Answer
A:
A. There are different systems and processes on the market. DIPOC International uses diamond discs and pads to polish concrete, as do other companies, no difference there. The real difference comes in the whole process, which includes more than
... more
2 Likes
·
1 Answer
A:
MRF does not have any inherent limitations for polishing of aspheres. The process may be used to polish (figure correct and smooth) aspheres with mild-departure (<20 microns) or with large-departure (hundreds of microns). Additionally, MRF is very
... more
2 Likes
·
1 Answer
A:
The Q22 MRF systems have been used successfully to polish many different materials, including most optical glasses and single crystals such as calcium fluoride.
... more
1 Next