Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
A single-family dwelling may be converted to a licensed RCF, however, the following must be considered. First, approval through the Certificate of Need Program is required for any facility that will cost more that $600,000 to develop. In addition,
... more
Can I display the centrifugal force (rcf, g force) automatically with the Centrifuge 5424 / 5424 R?"
1 Like
·
1 Answer
A:
"Yes. It is possible to display the centrifugation speed in both rpm and rcf on all Eppendorf centrifuges.
... more
2 Likes
·
1 Answer
A:
RCF's Trombay plant is not operational ever since the retention pricing formula came into force. The Government has taken the weighted average price payable to different groups of companies (depending on the vintage of their plants). The Government
... more
2 Likes
·
1 Answer
A:
RCF producers label their products to warn of potential hazards, as part of each company's commitment to keeping employees and customers informed and to help ensure that proper work practices are followed. Labels also are applied in compliance with
... more
2 Likes
·
1 Answer
A:
Although not true at the extremes, as long as the total g-min (the RCF times the spin time) is equal, the results should be similar. As an example, 100,000 g for 60 minutes should yield similar results to 50,000 g for 120 minutes.
... more
2 Likes
·
1 Answer
A:
The magnitude of the radial force generated in a centrifuge is expressed relative to the earth s gravitational force (g force) and known as the RCF (relative centrifugal field). RCF values are denoted by a numerical number x g (ex. 1,000 x g). It
... more
1 Like
·
1 Answer
A:
For rcf, a "*" is displayed in front of the value. rpm is not indicated by a symbol.
... more
2 Likes
·
1 Answer
A:
The rcf (g-force) shown on the display is standardized for 15 ml Falcon tubes (rotor: A-4-38). The rcf to be attained at maximum speed for the various adapters are listed in the operating manual. In order to determine a specific rcf for a specific
... more
2 Likes
·
1 Answer
A:
The display is switched back and forth between rpm and rcf by pressing the "rpm/rcf" key.
... more
2 Likes
·
1 Answer
A:
The lowest rotational speed that can be set for both centrifuges is 800 rpm, equal to approx. 50 x g. In contrast to the MiniSpin, the MiniSpin plus can be switched back and forth between rcf and rpm by simultaneously pressing the "speed" arrow keys.
... more
1 Next