Base performance is indicated on product Directions For Use. Individual product performance depends on a variety of factors such as exposure, wear and tear, quality of application, quality of wood and location. Your local representative may be able ... more

Clear UV in its respective product has considerably stronger UV resistance and is normally used as the last coat to avoid strengthening color. Sansin Classic and Dec formulas require three coats to achieve complete saturation of the wood cell to ... more

Yes! PTL performs outstandingly on many wood species. Keep in mind that the color is somewhat stronger than with other Sansin wood coatings. • Can I mix Classic and SDF in the same can? Answer: No, the base formulas are inherently different. ... more

Adding water will reduce the quality of the product. If you still wish to add water (e.g.. for ease of spraying) than add NO MORE than 5%. Always add water to stain rather than stain to water. • How do I dilute color? Answer: Use the Clear UV ... more

There is no standard answer because coverage varies depending on the wood species in question. With exterior coatings, it's best to get as much product into the wood as possible. A cedar deck could use an average of 1 gallon per 200-300 sq ft. per ... more

Sansin uses the finest pure resins and ingredients, with no cheap fillers or paraffin - incorporating the best UV-protection technology available. Sansin is a premium, environmentally-friendly wood coating that protects wood while allowing it to ... more

Call toll free 1-877-SANSIN-1 (726-7461) for a dealer or distributor near you. • Can I just have one product for all my surfaces? Answer: No. Different surfaces can demand distinctly different characteristics from a coating. For example, a large ... more