Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
A. Silica Fume is dark gray in color. Concrete with Silica Fume will be darker in color.
... more
2 Likes
·
1 Answer
A:
A. Low permeability, high compressive strength and high abrasion resistance. The low permeability is desirable in concretes that have steel and are exposed to de-icing salts or saltwater such as in bridge decks and marine docks.
... more
2 Likes
·
1 Answer
A:
Fused silica is the primary optical material used for 248- and 193-nm lithography. Calcium fluoride is used as a companion material to fused silica for color correction at 193 nm and is also used in areas of high flux because of its high laser
... more
0 Likes
·
1 Answer
A:
The electrical resistance of the EDI system increases with decreasing temperature. The power supplies for EDI systems are sized to compensate for this down to a temperature of 41oF (5oC) below that temperature the performance may decline due to DC
... more
2 Likes
·
1 Answer
A:
The silica purifying shampoo contains the unique Blue Lagoon ingredients to nourish, moisturize and soothe the sensitive scalp and the active ingredient piroctone olamine which effectively combat dandruff.
... more
2 Likes
·
1 Answer
A:
SILICA detects if there is another interface that has an IP address before proceeding to do an attack. This warning message is designed to let you know that there could possibly be a conflict due to default gateways and routes. If you are trying to
... more
2 Likes
·
1 Answer
A:
Silica is the chemical compound silicon dioxide, an oxide of silicon. Silica is most commonly found in nature as sand or quartz, as well as in the cell walls of diatoms (as in diatomaceous earth. It is the most abundant mineral in the Earth's crust.
... more
2 Likes
·
1 Answer
A:
New additives improve the use of silica to reduce the rolling resistance of tyres. Tyres with silica treads first appeared about 10 years ago, and offer better fuel economy and improved traction in a variety of weather conditions. The fuel
... more
2 Likes
·
1 Answer
A:
Silica Get Treatment (SGT) is for total petroleum hydrocarbon (TPH) measurements only. Total oil and grease (TOG) measurements should not get the SGT as the silica gel removes the polar organics which should be part of the TOG measurement. If a
... more
2 Likes
·
1 Answer
A:
As only 15 mls of solvent is needed for oil in water analysis and clean up, the cost per sample can be as low as US$1.00.
... more
1 Next