Filter by tags
Questions, Articles and Polls
2 Likes
·
1 Answer
A:
The vortex shedding meter is best used for gas and steam, as well as liquids of low viscosity that do not contain significant amounts of solids. In fact, steam is the largest single application for vortex meters. The vortex meter can be used in
... more
2 Likes
·
1 Answer
A:
All major textile manufacturers are in agreement that “hot water extraction with maximimum moisture and residue removal” is the right way to take care of their goods. This is where brute power comes into play. More vacuum means a better clean,
... more
2 Likes
·
1 Answer
A:
Typically, people who buy Vortex machines are entrepreneurs. They come from all walks of life. Al Bradham was an engineer at a nuclear power facility. Paul Schmedeke is a professional fighter. One of our customers retired from the FBI just before
... more
What is the easiest way to play DTS 5.1 surround sound files encoded by Vortex Surround Encoder Pro?
2 Likes
·
1 Answer
A:
You can use iTunes to play 44.1kHz - DTS encoded files - to play 5.1 material. David Battino of O'Reilly Digital Media explains: http://blogs.oreilly.com/digitalmedia/2008/08/itunes-surround-sound.html Thanks to clever data compression, it's
... more
2 Likes
·
1 Answer
A:
Yes, although we recommend the return temperature remains above 40°C. However, it is more usual to connect underfloor heating via a system of mixing valves or even a separate calorifier so that radiators which are normally heated to a higher
... more
2 Likes
·
1 Answer
A:
Yes. Providing the system is cleansed thoroughly and updated to fully pumped operation (not gravity hot water).
... more
2 Likes
·
1 Answer
A:
There are a few pokemon that can learn both Solarbeam and Earthquake in either of those types. Ground types that can learn both: Flygon Claydol Camerupt Torterra Pretty Much every grass type pokemon can learn Solarbeam, and a few more that learn
... more
2 Likes
·
1 Answer
A:
Aeration is very important when rehydrating PolySeed. The bacteria in PolySeed require a sufficient amount of air (i.e. oxygen) to reproduce correctly. Many labs aerate PolySeed by pulling a vortex (the tornado-like funnel that occurs when a liquid
... more
2 Likes
·
1 Answer
A:
The Vortex Tube is rated in BTU/Hr. based on inlet temperatures of 68F and pressure of 100 PSIG. Any change of temperature or pressure will affect the rating of the Vortex Tube. Please contact as STREAMTEK Applicaiton Engineer to determin the
... more
2 Likes
·
1 Answer
A:
There two ways to find out what Cold Fraction you are currently using on your STREAMTEK Vortex Tube. (1) By using the Performance Data chart found here. You can measure the temperature of cold air exhausting and compare it to the chart. It's
... more
1 Next