Below are the steps to assist you in setting the Date and Time on your calculator. NOTE: The “Time Set”, “AM/PM”, “12/24” and “Format” associated keys are on the faceplate above the respective key. Position the calculator so that you can look directly over the keypad to see the notations. Setting the date: 1. Press the CALENDAR/CLOCK Key. The default date will appear. 2. Hold the TIME SET key down for 3 seconds or until you see the first digit begin to blink in the display. 3. Input the correct date. 4. Firmly press and release the TIME SET key. The first digit should stop blinking and the date is then set. Setting the time: 1. Press the CALENDAR/CLOCK key. The default time will appear. 2. Hold the TIME SET key down for 3 seconds or until you see the first digit begin to blink in the display. NOTE: The seconds will disappear. 3. Input the correct time. If you need to adjust to AM or PM, press the AM/PM accordingly. 4. Firmly press and release the TIME SET key. The first digit should st