The KL-2000 has a rechargeable battery built in, as well as a memory backup battery. The memory backup battery is a CR2032, which can be replaced using the procedure found on page 68 of the manual. The built-in rechargeable battery cannot be replaced by the user. If this battery needs to be replaced, then the unit must be sent to an Authorized Service Center.^Top KL-P1000 or KP-C10 Label printer isn’t being detected by PC when I try to print. First, be sure to download and install the latest version of the FA-B30 software from the Casio Web site. It is recommended that software be installed before connecting the label printer to the PC for the first time. Connect the Label Printer to the PC’s USB port. Be sure the cable is securely connected to both the PC and the Unit. The PC should detect new hardware, and may attempt to automatically install the proper driver. If automatic installation fails, or you choose to skip automatic installation, then you may see a dialog box with a message
The KL-2000 has a rechargeable battery built in, as well as a memory backup battery. The memory backup battery is a CR2032, which can be replaced using the procedure found on page 68 of the manual. The built-in rechargeable battery cannot be replaced by the user. If this battery needs to be replaced, then the unit must be sent to an Authorized Service Center.^Top KL-P1000 or KP-C10 Label printer isn’t being detected by PC when I try to print. First, be sure to download and install the latest version of the FA-B30 software from the Casio Web site. It is recommended that software be installed before connecting the label printer to the PC for the first time. Connect the Label Printer to the PC’s USB port. Be sure the cable is securely connected to both the PC and the Unit. The PC should detect new hardware, and may attempt to automatically install the proper driver. If automatic installation fails, or you choose to skip automatic installation, then you may see a dialog box with a message