How do I operate the MasterCraft cruise control system?
On boats equipped with a Cruise Control System, it is possible to review various functions by toggling to the cruise control read-outs on the multi-function gauge. Note also that the throttle position must always be greater than the speed set on the cruise control. For example, if the cruise was set at 35 mph but the throttle position is equivalent to 25 mph, the boat will not reach 35. This is also true of the RPMs. Also, the cruise control cannot be engaged when the boat is at idle speed. System Start-Up: When the ignition is turned on the cruise control system starts in the OFF mode. While it is in OFF mode, the LCD display will show the current time. RPM Set-Point Adjustment: In order to adjust the RPM Set Point in OFF Mode, first move the RPM/SPEED mode selection switch to the RPM position. Using the +/- switch, select the desired Set Point. The RPM icon will illuminate and the LCD will display the current Set Point. Briefly pressing the +/- switch will increase or decrease the Se
