How do you change a clutch in a 1992 Pontiac Firebird?
Drain the trans fluid and toss it Take the Track bar off the rear axle Unbolt the brake line brackets from the rear axle Unbolt the lower shock bolts Use a Jack to support the rear axle and disconnect the rear shocks, then lower the axle. BE VERY CAREFUL TO NOT KILL YOUR BRAKE LINES WHEN YOU DO THIS Take the Rear Coil springs out. Take the Rear bolts out of the Torque Arm Take the Front bolts out of the Torque Arm Bracket Pull the Torque arm. Make a mark on the Driveshaft and the Rear Axle Pinion Flange so you know which side is up. Unbolt the rear U-Joint Straps. Pull the Driveshaft out of the Transmission Disconnect any sensors or cables on the Transmission Use a jack to slighty lift the Transmission and remove the Crossmember bolts Take out the Crossmember Remove the Transmission from the Bellhousing (4 Bolts) Have someone else handy and one of you get on each side of the transmission and pull it backward and down to get it out Disconnect the Clutch fork push rod and spring Unbolt t
