How Do You Install A Remote Starter In A Buick Rendezvous?
A remote starter is a device that allows a driver to start the car from a remote location, such as the inside of a house, office or school. The purpose of a remote starter is to allow a car to warm up prior to being driven, and to run the heat or air conditioner so as to establish a pleasant temperature in the car before the driver enters. Some newer cars have factory-installed remoter starters, but if you own a Buick Rendezvous you will have to install the remote starter on an aftermarket basis. This article will provide you with step-by-step instructions on how to install an aftermarket remote starter in your Buick Rendezvous. Remove the heat cover underneath the driver’s side dashboard. Use the needle nose pliers to remove the four pins holding the cover in place. This is the best location to install a remote starter in a Buick Rendezvous. Mount the remote starter on the plastic molding on the inner left of the heat vent using a thin coat of rubber cement. Open the vehicle’s hood an