How Do You Install A Water Pump In A Plymouth Neon?
A Plymouth Neon is a small car built to be not only fuel efficient, but it also comes with a price tag that’s easy on the pocketbook. You save even more money if you replace any defective parts yourself. Although there are a lot of parts to remove, you can replace a bad water pump in your Neon with moderate ease. Remove the Neon’s negative battery cable. Using a screwdriver, loosen the screw that connects the negative battery cable to the battery post. Pull the cable away from the post. Jack up the car using an automotive jack. Support the Plymouth Neon with jack stands and the engine using a lift or some other engine support device. Put a container underneath the radiator directly below the drain plug. Remove the drain plug to allow the engine coolant to flow out. Pour this toxic fluid into a sealed container for proper disposal when you’re finished with your repair. Use an adjustable wrench to remove the parts that lead to the water pump. Lay them out in the order removed. In order,
