What are the steps to correctly assemble my inflatable boat?
• Inflate all tubes to approximately 75% full. • Insert boat seat in designated spots. • Place deflated air floor inside the boat. Grey plywood board should be facing the keel. Make sure that valve of the keel is accessible through the hole in air floor. You will need it later to inflate keel through this hole. • Place both ends of plywood boards under left and right sides of tubes. • Stretch air floor along the boat bottom, so it covers it from nose to transom. The rear end of the air floor should be touching transom. • Inflate the air floor until it’s hard. You will know that the floor is fully inflated when air pressure starts pushing the air pump handle up. • Inflate all tubes 100% until hard to touch. • Inflate keel through the hole in air floor.
