What is the pinout for the pass-through cable?
• Here is the pinout for the 9-pin VGA In on the Hollywood Plus from a post by Alain: Note: SDA and SCL signals are not required to get the mpeg boards to work, it is only to keep the Plug&Play compatibility for the monitors if they support this feature. External view, seen from the bracket: _________ /_________\ | | | 9 8 7 | | 6 5 4 3 | \ 2 1 / ——— 1:Blue IN 2:GND 3:Green IN 4:GND 5:Vsync IN 6:Hsync IN 7:Red IN 8:SDA (from pin12 of DB15) 9:SCL (from pin15 of DB15) • Where can I get the VGA pass-through cable? • If you didn’t get one with your card, ask your reseller for it • If that doesn’t work, consult Sigma Designs’ site. They have a Fulfillment/Supplies order line on their Support Page • Vendors selling cards without cables • If you didn’t get VGA pass-through cable with your Hollywood Plus, ask your vendor for it – maybe they forgot? You’ll still be able to use the TV-out as long as you’re running v1.5 of the driver or later. • If you didn’t get a SVideo-to-Composite adapt
