How Do You Replace A Buick Rendezvous Power Window Switch?
The Buick Rendezvous was manufactured with optional power windows, which use several switches to operate the motorized window regulator. These switches can fail due to moisture, overload or mechanical damage. The average backyard mechanic can replace a power window switch assembly in a Buick in about 20 minutes. Open the hood and disconnect the battery by turning the positive terminal bolt in a counterclockwise direction. Set the terminal bolt aside, away from any metal or the battery itself. Gently pry up the rear section of the panel with a screwdriver to disengage the plastic tabs that hold it to the armrest. Once the tabs are up, continue to pull the panel away from the armrest until the wires beneath are visible. The switches come out as an assembly, attached to the longer section of switch panel plastic. Disconnect the switch assembly from the wiring harness by pulling the adapter plug from the rear of the switches. The plug is designed to only fit into the switches in one direct