Are there Discrete Power / Input Remote Control Codes from the Stock Remote?
• To enable Discrete mode: • Set the remote control switch to TV mode • Press and hold the power button until it flashes • Press “0” – wait for two flashes of the power button • Press “0090” – wait for two flashes of the power button • The remote is now set up in direct input selection mode. • Power turns things on. Stop (on the VCR section) turns it off. • Press “Input” and then either a Number or one of the function keys – each combination matches up with a particular input. • Press “Format” and then a number from 1-7 – depending on which input you’re on and what type of signal, you’ll go directly to the selected format (aspect ratio.) The numbers match up with the order of the formats as described in the manual.
